Тут сам процесс , найди брусок , подгони , высверли , привари ручку ,трос подгони , обожги , склей . А потом 5ть минут поработай выкинь его . Ну если это не зубная щетка . Хотя после первой чистки зубов тоже сразу же выкинь . Она больше не понадобится .
Great if you've a workshop, time and nothing better to do. I'll pop down to BnQ, buy a brush, be back, finished brushing and having a cuppa before he's halfway through making that...
I just watched a video on a case with a young boy having grilled burgers and suddenly got a piercing pain in his ear. For ~10 days he went to several doctors who didn't know the cause, even after several scans on the ear. When he got fever and swelling on the throat area, he was scanned there, and it was found out a single metal bristle has lodged into his throat which had caused the pain in his ear. It was really small and no one was able to catch it in the scans because they focused on the ear. The ear is connected to the throat through the eustachian tube, that why he's feeling the pain there. After surgery to remove the abscess and a bout of antibiotics he has recovered. It was found out later the metal bristle came from the metal brush used to clean the bbq grill, where came off and stuck there, got lodged in during cooking the burger patties, and ended up in his throat. So warning to everyone, be vigilant when using metal brushes on stuff you use when you eat.
I've never seen anyone into DIY who doesn't own an angle grinder. It's not like they broke out a Bridgeport mill for this, it's just a hand-held spinny disk
comments say that it's too cheap to buy, but I am in Africa and would definitely do that if I had no brush, my tools run on solar panels and I also think that if you are using this you have the feeling of, I made it myself and it works!
Все кто пишет "легче купить" или "зачем?" , видимо случайно мимо шли?)) Скучно ведь делать что-то только по необходимости. Иногда хочется что именно сотворить.
Quizás el lugar donde vive no dispone de tiempo por la distancia para ir a comprar 1 o varios cepillos, o quiso ver cuánto le dura ya que todo es chino y de baja calidad
![Fighting Myself [Official Audio] - Linkin Park](http://i.ytimg.com/vi/iKBCVZqqooY/mqdefault.jpg)
I mean I applaud your skill in making this.... but a steel brush is like $4 at a hardware store
Right
I agree completely
Y
I mean, they could be marketed as "Made with hand precision." ...idk. Appears to be a Paul Bunyan story.
@sicstar Probably why he made his own
I make my own screen doors. Most people buy them because they are cheap, but I like the look of a home made screen.
"Home made screen"
That's hilarious
They started grinding and I didn't have safety glasses on. You gotta let a brother know.
I don't have any eyebrows or lashes since those flames
😂
Or just save yourself the four hours and spend $2 at Walmart.
@Everlasting Life you could build a table or a dog house or something, but a brush?
Saving time or money isn't the point. People enjoy building.
You can just buy it at Walmart for 2$ 🤓
Wal-Mart ?
You fancy huh ?
$1.51 at Dollar General.
Скажите ему, пожалуйста, что уже есть специальные щётки на его УШМ...
Да и щетка стоит копейки в любом магазине строительном
jajajaja 🤣🤣🤣
@AFK 🦄
Тут сам процесс , найди брусок , подгони , высверли , привари ручку ,трос подгони , обожги , склей . А потом 5ть минут поработай выкинь его .
Ну если это не зубная щетка . Хотя после первой чистки зубов тоже сразу же выкинь . Она больше не понадобится .
Hihi, actually no one make diy wire brush.... Even china made are cheaper
normal tooth brush in Ohio 💀
We have teeth to brush Kentucky
softest*
This can give you really clean mouth with nothing left inside😂
俺确实也是。
ffgdg
确实也是。
nah mate,false teeth stay.
@Will Xtinger it's a cut throat world.
Awesome, I’ve been looking for a new toothbrush 👍
Only on social media is this a better alternative than picking one up for a couple of bucks at the store.
щётку по металлу легче и дешевле купить в магазине
да и дешевле
@гараж 27 rus а ты купи на деревянной основе и неразвалится.ненадо на пластиковой основе брать.
Так делают ли они это в матушке-России?
Great if you've a workshop, time and nothing better to do. I'll pop down to BnQ, buy a brush, be back, finished brushing and having a cuppa before he's halfway through making that...
@Eugen Fabryi И это немного раздражает, пугает и вызывает в общем странные чувства
It's not about which one is cheaper.. it's about the making process
this is what I use to brush my teeth before going to the dentist.
Heads up pal... ya can buy wire brushes in B&Q 😁
Can get them in hardware stores too. Best part is they are dirt cheap.
В алюминиевую трубку вставляешь трос и плющишь.
Болгаркой отрезаем и щётка эффективнее, проще и намного функциональнее..
@Ю Бер
Перечитай мой коммент, особенно два последних слова...😁
На 100% согласен!)
купить новую щётку в магазине?
-нет
потратить пол дня, и сделать какую то дичь?
-да
Если хорошо приклеил то будет самодовольствоватся ))
😂🤣😂🤣👏👏👍
может ему это в удовольствие. Или не может себе позволить, хотя первый вариант вероятнее всего
@Лучшие Подборки для очень труднодоступных мест
Доктора, срочно!
Доктор скажет сразу что проще купить💁♂️
@Сергей Редькин это мега ляхи
250 полу ляхов.
@Кирилл Турунен Ливси
I like how they're all magically soldered afterwards
"super" glue, don't'cha know? :P
Практикантом матроса делали это,только на деревянном бруске в 1978 г.
Can be had for a few bucks at any hardware store.
Or you could buy a wire brush for about three bucks in every hardware store on the planet.
I just watched a video on a case with a young boy having grilled burgers and suddenly got a piercing pain in his ear. For ~10 days he went to several doctors who didn't know the cause, even after several scans on the ear. When he got fever and swelling on the throat area, he was scanned there, and it was found out a single metal bristle has lodged into his throat which had caused the pain in his ear. It was really small and no one was able to catch it in the scans because they focused on the ear. The ear is connected to the throat through the eustachian tube, that why he's feeling the pain there. After surgery to remove the abscess and a bout of antibiotics he has recovered. It was found out later the metal bristle came from the metal brush used to clean the bbq grill, where came off and stuck there, got lodged in during cooking the burger patties, and ended up in his throat. So warning to everyone, be vigilant when using metal brushes on stuff you use when you eat.
What what the silicone brush at the beginning for
@Vince Scarpa do you know!?
So you comment "what is the silicone for" then lots-o-comments = youtube feeds more people this video because the algorithm thinks its engaging
Very cool wire brush tutorial thanks for the video...🥳
Very cool wire brush tutorial thanks for the video...
99 cent store quality for around $10 worth of material and labor.
Makes perfect KZclip sense to me.
@FlourishWitherDie
Remember, with this guy your hiring a hack.
You might be worth $30.
The labour alone would be at least $30
The materials that went into you making that brush alone were probably significantly more than the cost of just buying one
3 pack of different wire brushes at Dollar General, $2.99.
Spends hours building a brush, using materials that cost more than the brush.
my dad's brush after using it for 4 years straight:
If I didn't know how to buy one, I'd be grateful
That can give you really white teeth with only single brush
And being left with only single tooth
And bleeding gums 😊
У человека полно времени и инструмента, но почему-то щётку металлическую он не смог купить 😄
Yes, it’s not the cost. It’s the satisfaction of doing it. Kinda like making your own backyard grill
Man, there's alot wire brushes at Dollar store.🤔
i spent $800 on all the powertools i had to buy to make it but now noone can stop me from brushing all the metal i want
This is what the entire children population of Britain needs
Забивать надо пластины из металла. Например хоть алюминий вместо клея. Нагреется и отвалится
Да тут мозг уже отвалился, что ему те пластины
Отвалятся раньше
I had the same thought
The last metal brush I bought costed about 1,50 euros.
Let me just quick grab my milled aluminum handle for this diy project that I have sitting around...
You can get a box of detail brushes for the cost of what you made..
Super clean body brush
Very handy! Also on sale at Menards for $3.29 😬
Mal ne Frage was hat denn der Silikon Pinsel am Anfang mit der Drahtbürste zu tun.
@Fung Dark sag mal ist dir nicht in den Sinn gekommen wenn ich Deutsch schreibe dass ich nur die deutsche Sprache beherrsche
It makes you comment out of confusion.
These shorts are diabolical, criminal
Lo mismo pienso yo saquénme de la duda
The skills acquired through making something are usually a factor of that processes value.
Made a broom version and boom my floor has never been smoother
Nice toothbrush
Wow. What a useful tool. Too bad they don't sell them for $4 at Lowes.
This can definitely scratch my back real nice
Даже искра в глаз попала! 😉👍
Соблюдайте ТБ⚠️
Should weld a warning label.. Do not use as tooth brush. People sue for everything these days.
Nice job! Super cool!
So nice 😊😍
Amei exelente 👍
Toothbrushes in Ohio be like
Взял и металл тросика горелкой отпустил. :)
Вообще бред, всё так хорошо начиналось
You know its not a DIY anymore when you have a metal cutting machine
I've never seen anyone into DIY who doesn't own an angle grinder. It's not like they broke out a Bridgeport mill for this, it's just a hand-held spinny disk
I can see my mother testing it on me 💀💀☠️
Годный лайфхак, получилась вечная зубная щётка)))
Harbor Freight sells wire brushes for cheap
Much cheaper and convenient to buy steel brushes
comments say that it's too cheap to buy, but I am in Africa and would definitely do that if I had no brush, my tools run on solar panels and I also think that if you are using this you have the feeling of, I made it myself and it works!
I'm so glad not to live in Africa.
We have 99 cent stores in my neighborhood.
And 99 cents.
Really, I don't know how you do it but hat's off to you. 🍺
Galing talaga to
Just bought a stainless steel wire brush on Amazon for $3
Normal day brushing hair with this comb in OHIO
Or you can buy 30 of them for $2 at Harbor Freight.
This is great for homesteading but I can assure you a brush is extremely cheap my friend. Nice work tho
*buys a 5 dollar metal brush
NO THIS ONE ONLY TAKES 5 MINUTES /sar
Now this toothbrush will really get the plaque off 🤣
Все кто пишет "легче купить" или "зачем?" , видимо случайно мимо шли?)) Скучно ведь делать что-то только по необходимости. Иногда хочется что именно сотворить.
That brush can add your evil conscience 😂😂
Imagine how convenient it would be if they sold something like this at every hardware store... oh wait
I’d bet purchasing a wire brush costs less than the materials and time to make this.
In ferramenta, € 2,50!!!
Quizás el lugar donde vive no dispone de tiempo por la distancia para ir a comprar 1 o varios cepillos, o quiso ver cuánto le dura ya que todo es chino y de baja calidad
@White Lion Made in Italy, garanzia di qualità! E sopratutto duraturo! Ovviamente in base all'utilizzo che uno fa!
made in china and loses hairs on day one 😀
Лучшая щётка для чистки зубов что я видел 👍 Кариеса точно не будет.
칫솔 기가맥히게 잘만드네요.
dmn that looks better than the toothbrushes in Asia
This is great.....when you make 5 cents an hour and can't afort a 4 dollar brush from the store.
everybody gangsta until some dude puts it in their mouth and brushes their teeth with it
use with colgate dr. s recommend.
Idk why, I know it's a metal scraper brush but I just wonder what it'd do to your head💀
Seems like a nice face towel 😂
Great work😍.
Quem sabe, faz ao vivo.
imma use that to scratch my back for real
Or just go to the big box home store and buy a selection, for like $1 each
Average toothbrush in Ohio 😂
Rather than spend half a day making this I’d just drive to the hardware store and spend $5 to get one 👍🏼
I would just buy a new wire brush😂
A real man uses it to brush their tooth
Такую зубную щётку своей тёше я подарил 😏очень люблю её
Or a 6 pack for 3 bucks at Harbor Freight...
brush hardness limit reached
preciso de umas 2 dessas para os dentes
What was the yellow goo for?
They're pretty dang cheap, and it doesn't need to be heirloom quality !
I bet half of the people thought it was a toothbrush until the end
looks great to shour
U know they sell those for like 3-5 bucks
They sell he metal wire brushes at Ace hardware just a heads up lol
Now I can scrub my feet!!